How To Install Danco Tub Drain Stopper
How to Supplant an Overflow Plate & Tub Bleed
Step-by-step Instructions
By changing the overflow plate and drain on your tub in conjunction with a new tub spout and trim plate, y'all tin can exhale new life into your bathroom. Add an updated mode or new cease, and you will feel like you stepped into a completely new room without a renovation budget.
Tools and supplies required: Phillips Screwdriver, Flathead Screwdriver, Adjustable Pliers, Tub Drain & Potato Wrench
i
Remove the Mounting Screws from the sometime Overflow Plate and remove and discard your old Overflow Plate. Simply, go along the Screws, as you will apply those to attach the new Overflow Plate.
2
Danco's Overflow Plates feature a Universal Fit design, which ways that they include an Adapter that allows you to add a single-pigsty Overflow Plate to an existing two-hole Connection. Next, install the included Adapter past aligning the slots to the Spiral Holes in the Drain Flange and adhere with Mounting Screws removed from the sometime Overflow Plate.
3
Attach the new Unmarried Hole Overflow Plate to the Adapter using the new Screw.
4
Remove the existing Plug from the Tub Shoe Drain Assembly by unthreading until it is disconnected.
5
Turning counterclockwise, unscrew the old Tub Shoe Drain Assembly from the Tub using Plier handles or a Danco Tub Drain & Irish potato Wrench.
6
If possible, remove the black safe gasket from the underside of the tub. Replace it with the gasket that came in your kit. Sometimes the original gasket may non be possible to access; in that case, skip this stride.
7
Measure the Drainpipe size. If 2", Bushing will be needed. The bushing is the white plastic piece on the base of the new Tub Drain. If your Drainpipe measures1 1/2″, Bushing will not be needed, so unthread information technology from the Tub Shoe Drain Assembly. Spread an even layer of Plumber'south Putty under the Flange of Tub Shoe.
8
Turning clockwise, thread Tub Shoe Drain Assembly into Drain (with bushing, if required). You lot can apply Pliers or a Tub Drain & Spud Wrench to tighten and then the Tub Shoe Flange is flush against the Tub surface.
9
Trim the backlog Plumber'due south Putty.
10
Turning clockwise, thread Plug into Bleed Assembly. In club to get a tight fit for the Plug into the Drain Assembly, you can remove the screw that holds the superlative of the Plug to the Stopper Post. Then, utilize Pliers to help tighten the Mail service into the Drain. Once tight, reattach the acme of the Plug past tightening the spiral to the Mail.
Source: https://www.danco.com/how-to-guide/how-to-replace-an-overflow-plate-tub-drain/
Posted by: carrhasold.blogspot.com
0 Response to "How To Install Danco Tub Drain Stopper"
Post a Comment